• TSX:NCU
  • OTC:NEVDF
Menu

Surface Works Photos

December 2019

September 2019

Feeder and conveyor tail chute in place, structure ready for Reclaim bin arrival. Bollards now complete for load operation
E Legs ready for E House and bunding for transformer placement. Stacker king pin also being completed
Mechanicals to RT 10s and 20s being completed. Platforms on ground ready for installation next week
Scats conveyor in place over bunker. 15CV01 in place ready for weightometers, instrumentation and belt install
Mill Instrumentation and protection systems the current focus in Area 20 Electrical. Field terminations of Power to mills also outstanding, with permanent lubrication systems continuing
Tailings thickener gasket installation continuing. 42TH01 bridge installed, nozzles and pipework to tank continuing
Filter feed tanks paintwork continuing with the tailings tank underway on the instide, the concentrate being completed outside.
Stair tower in place to East side of 50ST01. Tailings filter components have been forwarded to allow commencement of filter builds
Air compressor shed floor in place.
End bay roofline in place showing final building profile. Area 60 Lime silo and reagents area continuing
Air receiver foundations underway. Concrete suspended decks for concentrate and tailings filter access in place.

May 2019

March 2019

Area 20 SAG Mill Discharge pedestal forms nearing completion. Feed Pedestals forms beginning
Area 40 Thickening Anchor Bolt Layout prior to rebar top/bottom mats
Area 40 Thickening Anchor Bolt Layout prior to rebar
Area 30 Flotation Slab Final Inspections on Top Mat Rebar
Area 20 SAG Mill Discharge Pedestal Form Install - Cast In Steel Plate Install
Area 50 mud slabs for 50TK01 Filter Feed Tank to allow for Forms to begin
Area 30 into Area 20 Overall View
Area 50 retaining wall near 80CV01 DST Conveyor
Area 15 Bulk excavation for retaining wall for 15CV01 Conveyor bin
Area 20 SAG Mill Feed pedestals forms continues
Area 30 Regrind Mill Poured with forms just removed
Area 30 Flotation Slab first rebar layout
Area 50 Conduit near Filter Feed Tank 50TK01
SC2 Pond near Coarse Ore Stockpile Pad, prep for Liner Install
Area 40 mud slab pour 2 of 2 Thickener area
Area 40 backfill of 75TK01 Fresh/Fire water Tank
Area 40 backfill of 75TK01 Fresh/Fire water tank
Area 30 Rebar of Flotation slab
Storm trench preperation for Liner near Coarse Ore Stockpile pad
Area 20 SAG/Ball Mill rebar of pedestals
Area 30 Flotation slab rebar
Area 40 40TK01 Thickener Tank mud slab forms
Main access road heading south looking at sag mill rebar and regrind mill formwork
Formwork
Conduits
Mill flotation area and mill pedestals
Mill flotation area and mill pedestals

February 2019

Vertical formwork for SAG mill foundation
Vertical formwork for SAG mill foundation
Fresh water tank construction
Surface Works
Foundation work
Main shaft and EN headframes and surrounding works

January 2019

Contact water pond tailings cell 1 completion
Process water line install
Rip Rap drain lining continues
placement of conditioned fill under the mill
Testing foundation under mill
Tailings cell 1 ready for lining
Phoenix - commencement of Mill foundation excavation
First Delivery - flotation cells
First Rebar delivery - 29th Jan
Non contact water dam below East North Shaft finalised
Pole island being removed - Mine dry area

Concrete Pour for Warehouse Foundations: Dec 2018

Surface work for low-grade/high-grade stockpiling zone: OCT 2018

Miscellaneous: OCT 2018

Projects

Teamwork. Innovation. Execution.